gbogbo awọn Isori

Polyurethane apapo alemora Series

O wa nibi : Ile>Ọja>Alemora & lẹ pọ>Polyurethane apapo alemora Series


J301 Iwọn otutu giga resistance PU alemora

Ibi ti Oti: China
Brand Name: OWO
Apoti alaye: Plastic cask
Akoko Ifijiṣẹ: O fẹrẹ to awọn iṣẹ ọjọ 15
Owo ofin: T / T, L / C
Ipese Agbara: 10 pupọ / Awọn toonu fun Ọjọ kan

Ọja Apejuwe

Awọn alaye ni kikun

● BEECORE PU adhesive J301 is two-component adhesive, mainly used for bonding honeycomb panels, corrugated board products, etc.


● BEECORE adhesive J301 is a two-component adhesive. Component A is composed of a variety of polyols, adhesion enhancers and fillers. The appearance is a yellowish red viscous fluid, and component B is a coarse MDI. It is a brownish yellow transparent viscous liquid.

ohun elo

● BEECORE Polyurethane composite adhesives are widely used in the construction industry, automobile manufacturing and shipbuilding, such as polyurethane sandwich panels, aluminum honeycomb panels, polystyrene foam panels, fiberglass panels, stone composite panels, metal plates, etc.

ifigagbaga Anfani

● Good flexibility

● High bonding strength

● Cost-effective

● Water and heat resistant

ni pato
Technical Parameters ( tested under 20-25°C)
ohun Component A Component B Lẹhin Ti Dapọ
Awọ yellow to yellowish red brownish yellow Ko ki nse funfun balau
Density (g / cm3) 1.30 ± 0.02 1.00 ± 0.02 1.15 ± 0.1
State ito ito ito
Iwọn idapọ 5: 01
Lẹhin Ti Dapọ
Work life(100g) 50-60 mins
Recommended operating time within 35mins (from mixing   to finishing)
Temperature Range for application 15-35 ° C,Ọriniinitutu 45%
Initial Bonding 5-6 hours at 25°C / 60mins   at 65°C
Time to reach full cure 1-2 days under room temperature
/   24 hours at 60°C keep 60mins
Shearing Strength 13MPa (60mins at 60°C or 3 days at 25°C)
VOC Test Accord with GB18538 /TB3139
Ipele Idinku Ina S4 (DIN5510)