barcha kategoriyalar
EN

Poliuretan kompozit yopishtiruvchi seriyali

Siz bu yerdasiz : Uy>mahsulot>Yelim va elim>Poliuretan kompozit yopishtiruvchi seriyali

  • https://www.beecorehoneycomb.com/upload/product/1591946076837633.jpg

J301 Yuqori haroratga chidamli PU yopishtiruvchi


Kelib o'rni: Xitoy
Tovar nomi: BEECORE
Qadoqlash Tafsilotlar: Plastik quti
Yetkazish vaqti: Taxminan 15 ish kuni
To'lov shartlari: T / T, L / V
Ta'minot qobiliyati: Kuniga 10 tonna


Mahsulot tavsifi

Tez batafsil

● BEECORE PU adhesive J301 is two-component adhesive, mainly used for bonding honeycomb panels, corrugated board products, etc.

Tavsif

● BEECORE adhesive J301 is a two-component adhesive. Component A is composed of a variety of polyols, adhesion enhancers and fillers. The appearance is a yellowish red viscous fluid, and component B is a coarse MDI. It is a brownish yellow transparent viscous liquid.

ilovalar

● BEECORE Polyurethane composite adhesives are widely used in the construction industry, automobile manufacturing and shipbuilding, such as polyurethane sandwich panels, aluminum honeycomb panels, polystyrene foam panels, fiberglass panels, stone composite panels, metal plates, etc.


raqobat afzalligi

● Good flexibility

● Yuqori bog'lanish kuchi

● Cost-effective

● Water and heat resistant

Texnik xususiyatlari
Technical Parameters ( tested under 20-25°C)
buyum Component A Component B After Mixing
rang yellow to yellowish red brownish yellow Oqish
Zichlik (g / cm3) 1.30 ± 0.02 1.00 ± 0.02 1.15 ± 0.1
Davlat Suyuqlik Suyuqlik Suyuqlik
Mixing ratio 5: 01
After Mixing
Work life(100g) 50-60 daqiqa
Recommended operating time within 35mins (from mixing to finishing)
Temperature Range for application 15-35 ° C,45% namlik
Initial Bonding 5-6 hours at 25°C / 60mins at 65°C
Time to reach full cure 1-2 days under room temperature
/ 24 hours at 60°C keep 60mins
Shearing Strength 13MPa (60mins at 60°C or 3 days at 25°C)
VOC Test Accord with GB18538 /TB3139
Flame Retardant Rating S4 (DIN5510)


MA'LUMOT