Epoxy adhesive F104 for aluminum honeycomb panel

Hızlı Detay

● BEECORE Epoxy Adhesive F104 is a two-component, room temperature curing, high performance structural adhesive. It's applied for composited aluminum honeycomb panel. It has high bond strength, shear strength and no liquid dropping. No peculiar smell and adverse effects to the environment and users.

Açıklama

● Epoxy adhesive F104, it's made of toughening modified epoxy resin compounded with polymer materials. Thixotropic viscosity, non-sagging, longer pot life. The product has very obvious advantage of low temperature curing property.

● After cured, it has excellent properties of high strength, impact resistance, peeling resistance, mechanical and electric insulation properties.

Uygulamalar

● This product is mainly used for bonding and hanging the indoor stone, like directly bonding and hanging the marble & granite etc on the indoor wall or on the concrete wall with metal, also can be used for bonding the different materials like stone, metal, concrete, cement block, clay brick etc.

● Used for bonding oneself and mutual of metal, ceramic and foamed PVC board etc. where high impact strength and peeling strength resistance are required, such as train, shipbuilding, automobile engine assembly.

● Also it can be used for bonding of various composite material structural parts.

Rekabet Avantajı

● High cost performance

● Yüksek mukavemet

● Water and high temperature resistant

Depolama

● Depoya veya düşük sıcaklıktaki odaya konulmalı, süre 6-12 ayı geçmemelidir.

● Ürünler kuru, havalandırılmış ve serin yerde stoklanmalıdır, raf ömrü bir yıldır, test tamamsa kullanmaya devam edilebilir.

● Bu ürün yaygın tehlikeli bir üründür, ateş, ısı kaynağı ile uzak tutulmalı, yağmur ve güneşten kaçınmalı, yüklemeyi yavaşlatmalı ve darbe, inversiyon, rulo vb.

Main Technical Index

İnşaat teknolojisi

● Please make the composite panel to be polished and smooth, remove dirt, gravel, oil and other impurities and dried.

● Before using, please homogenize component A and B separately first, and full mix thoroughly following A: B = 2:1 ratio. Put the adhesive on the back panel, fractioning back and forth with knife, make the adhesive homogeneous distribution.