sadaya Kategori
EN

Sintetis Polyurethane Komposisi

Anjeun aya didieu : Imah>barang>Perekat & Lem>Sintetis Polyurethane Komposisi

  • https://www.beecorehoneycomb.com/upload/product/1591946076837633.jpg

J301 Résistansi suhu luhur PU perekat


Tempat Asal: Cina
Ngaran Brand: AYA
Rincian bungkusan: Tong palastik
Waktos pangiriman: Kira-kira 15 poé gawé
Sarat pamayaran: T / T, L / C
Supply Pangabisa: 10 Ton / Ton per Dinten


Panjelasan Produk

jéntré gancang

● BEECORE PU adhesive J301 is two-component adhesive, mainly used for bonding honeycomb panels, corrugated board products, etc.

gambaran

● BEECORE adhesive J301 is a two-component adhesive. Component A is composed of a variety of polyols, adhesion enhancers and fillers. The appearance is a yellowish red viscous fluid, and component B is a coarse MDI. It is a brownish yellow transparent viscous liquid.

aplikasi

● BEECORE Polyurethane composite adhesives are widely used in the construction industry, automobile manufacturing and shipbuilding, such as polyurethane sandwich panels, aluminum honeycomb panels, polystyrene foam panels, fiberglass panels, stone composite panels, metal plates, etc.


Kauntungan kalapa

● Good flexibility

● kakuatan beungkeutan tinggi

● Cost-effective

● Water and heat resistant

spésifikasi
Technical Parameters ( tested under 20-25°C)
barang Component A Component B After Mixing
warna yellow to yellowish red brownish yellow Bodas kakonéng-konéngan
Kapadetan (g / cm3) 1.30 ± 0.02 1.00 ± 0.02 1.15 ± 0.1
nagara barang encer barang encer barang encer
Mixing ratio 5: 01
After Mixing
Work life(100g) 50-60 mins
Recommended operating time within 35mins (from mixing   to finishing)
Temperature Range for application 15-35 ° C,Kalembaban 45%
Initial Bonding 5-6 hours at 25°C / 60mins   at 65°C
Time to reach full cure 1-2 days under room temperature
/   24 hours at 60°C keep 60mins
Shearing Strength 13MPa (60mins at 60°C or 3 days at 25°C)
VOC Test Accord with GB18538 /TB3139
Flame Retardant Rating S4 (DIN5510)


panalungtikan