Vaega faapitoa uma
EN

Polyurethane Composite Adhesive Faasologa

Ua e i ai iinei: Fale>mea e gaosi>Pipi & Kelu>Polyurethane Composite Adhesive Faasologa

  • https://www.beecorehoneycomb.com/upload/product/1591946076837633.jpg

J301 High temperature resistance PU adhesive


Nofoaga o le Amataga: ōmea
Igoa Brand: FAʻAFETAI
Faʻamatalaga: Pusa palasitika
Taimi Faaooina atu: Pe tusa ma le 15 aso faigaluega
Tuutuuga totogi: T / T, L / C
Gafatia Tuuina atu: 10 tone / tone i le aso


Faamatalaga oloa

Faʻamatalaga Faʻamatalaga

● BEECORE PU adhesive J301 is two-component adhesive, mainly used for bonding honeycomb panels, corrugated board products, etc.

faʻamatalaga

● BEECORE adhesive J301 is a two-component adhesive. Component A is composed of a variety of polyols, adhesion enhancers and fillers. The appearance is a yellowish red viscous fluid, and component B is a coarse MDI. It is a brownish yellow transparent viscous liquid.

talosaga

● BEECORE Polyurethane composite adhesives are widely used in the construction industry, automobile manufacturing and shipbuilding, such as polyurethane sandwich panels, aluminum honeycomb panels, polystyrene foam panels, fiberglass panels, stone composite panels, metal plates, etc.


Faʻamanuiaga Faʻamasino

● Good flexibility

● Malosiaga fusia faʻatasi

● Cost-effective

● Water and heat resistant

auiliili
Technical Parameters ( tested under 20-25°C)
mea Vaega A Vaega B After Mixing
lanu yellow to yellowish red brownish yellow Paʻe-paʻepaʻe
Uiga (g / cm3) 1.30 ± 0.02 1.00 ± 0.02 1.15 ± 0.1
Malo Fia Fia Fia
Mixing ratio 5: 01
After Mixing
Work life(100g) 50-60 mins
Recommended operating time within 35mins (from mixing   to finishing)
Temperature Range for application 15-35 ° C,45% maualalo
Initial Bonding 5-6 hours at 25°C / 60mins   at 65°C
Time to reach full cure 1-2 days under room temperature
/   24 hours at 60°C keep 60mins
Shearing Strength 13MPa (60mins at 60°C or 3 days at 25°C)
VOC Test Accord with GB18538 /TB3139
Flame Retardant Rating S4 (DIN5510)


fesili