All Categories
EN

Polyurethane mejupụtara nrapado Series

Ị nọ ebe a : >lọ>Product>Nrapado & mama>Polyurethane mejupụtara nrapado Series

  • https://www.beecorehoneycomb.com/upload/product/1591946076837633.jpg

J301 High temperature resistance PU adhesive


Ebe nke Si Malite: China
Ika aha: EGO
Packaging Details: Plastic akpa
Oge Mbuga ozi: Gburugburu ụbọchị ọrụ 15
Ịkwụ Ụgwọ Okwu: T / T, L / C
Tụkwasịnụ Ikike: 10 ton / Tọn kwa ụbọchị


ase
Product Description

Ngwa ngwa

● BEECORE PU adhesive J301 is two-component adhesive, mainly used for bonding honeycomb panels, corrugated board products, etc.

Description

● BEECORE adhesive J301 is a two-component adhesive. Component A is composed of a variety of polyols, adhesion enhancers and fillers. The appearance is a yellowish red viscous fluid, and component B is a coarse MDI. It is a brownish yellow transparent viscous liquid.

ngwa

● BEECORE Polyurethane composite adhesives are widely used in the construction industry, automobile manufacturing and shipbuilding, such as polyurethane sandwich panels, aluminum honeycomb panels, polystyrene foam panels, fiberglass panels, stone composite panels, metal plates, etc.


asọmpi Advantage

● Good flexibility

● High bonding strength

● Cost-effective

● Water and heat resistant

nkọwa
Technical Parameters ( tested under 20-25°C)
item Component A Component B After Mixing
Agba yellow to yellowish red brownish yellow Nchapụ ọcha
Mkpa (g / cm3) 1.30 ± 0.02 1.00 ± 0.02 1.15 ± 0.1
State Fluid Fluid Fluid
Mixing ratio 5: 01
After Mixing
Work life(100g) Nkeji 50-60
Recommended operating time within 35mins (from mixing   to finishing)
Temperature Range for application 15-35 ° C,Iru mmiri 45%
Initial Bonding 5-6 hours at 25°C / 60mins   at 65°C
Time to reach full cure 1-2 days under room temperature
/   24 hours at 60°C keep 60mins
Shearing Strength 13MPa (60mins at 60°C or 3 days at 25°C)
VOC Test Accord with GB18538 /TB3139
Flame Retardant Rating S4 (DIN5510)


NCHỌPỤTA