sve kategorije
EN

Poliuretansko kompozitno ljepilo

Ti si ovdje : Početna>Proizvod>Ljepilo i ljepilo>Poliuretansko kompozitno ljepilo

  • https://www.beecorehoneycomb.com/upload/product/1591946076837633.jpg

J301 High temperature resistance PU adhesive


Mjesto podrijetla: Kina
Brand Name: BEECORE
Pakiranje Detalji: Plastična bačva
Vrijeme isporuke: Oko 15 radnih dana
Uvjeti plaćanja: T / T, L / C
Nabava Sposobnost: 10 tona / tona dnevno


Opis proizvoda

Brzi detalj

● BEECORE PU adhesive J301 is two-component adhesive, mainly used for bonding honeycomb panels, corrugated board products, etc.

Opis

● BEECORE adhesive J301 is a two-component adhesive. Component A is composed of a variety of polyols, adhesion enhancers and fillers. The appearance is a yellowish red viscous fluid, and component B is a coarse MDI. It is a brownish yellow transparent viscous liquid.

Aplikacije

● BEECORE Polyurethane composite adhesives are widely used in the construction industry, automobile manufacturing and shipbuilding, such as polyurethane sandwich panels, aluminum honeycomb panels, polystyrene foam panels, fiberglass panels, stone composite panels, metal plates, etc.


Konkurentska prednost

● Good flexibility

● High bonding strength

● Isplativo

● Water and heat resistant

Tehnički podaci
Technical Parameters ( tested under 20-25°C)
Stavka Komponenta A Komponenta B After Mixing
Boja yellow to yellowish red brownish yellow Off-bijelo
Gustoća (g / cm3) 1.30 0.02 ± 1.00 0.02 ± 1.15 0.1 ±
država Tekućina Tekućina Tekućina
Mixing ratio 5: 01
After Mixing
Work life(100g) 50-60 min
Recommended operating time within 35mins (from mixing   to finishing)
Temperature Range for application 15-35 ° C,45% vlage
Initial Bonding 5-6 hours at 25°C / 60mins   at 65°C
Time to reach full cure 1-2 days under room temperature
/   24 hours at 60°C keep 60mins
Shearing Strength 13MPa (60mins at 60°C or 3 days at 25°C)
VOC Test Accord with GB18538 /TB3139
Flame Retardant Rating S4 (DIN5510)


UPIT