All Categories

Sreath Adhesive Composite Polyurethane

Tha thu an seo: Dachaigh>bathar>Adhesive & Glue>Sreath Adhesive Composite Polyurethane


J301 PU adhesive teòthachd àrd

Place of Origin: Sìona
Brand Ainm: BEECORE
Fiosrachadh Pacaidh: Plastic cask
Lìbhrigeadh Time: Around 15 workdays
Riaghailtean Pàigheadh: T / T, L / C
Solar Comas: 10 Ton / Ton gach latha

bathar Tuairisgeul

Fiosrachadh mionaideach

● BEECORE PU adhesive J301 is two-component adhesive, mainly used for bonding honeycomb panels, corrugated board products, etc.


● BEECORE adhesive J301 is a two-component adhesive. Component A is composed of a variety of polyols, adhesion enhancers and fillers. The appearance is a yellowish red viscous fluid, and component B is a coarse MDI. It is a brownish yellow transparent viscous liquid.


● BEECORE Polyurethane composite adhesives are widely used in the construction industry, automobile manufacturing and shipbuilding, such as polyurethane sandwich panels, aluminum honeycomb panels, polystyrene foam panels, fiberglass panels, stone composite panels, metal plates, etc.

Buannachd farpaiseach

● Good flexibility

● High bonding strength

● Cost-effective

● Water and heat resistant

Technical Parameters ( tested under 20-25°C)
Notaichean Component A Component B After Mixing
Color yellow to yellowish red brownish yellow Neo-gheal
Dlùths (g / cm3) 1.30 ± 0.02 1.00 ± 0.02 1.15 ± 0.1
Stàite Fluid Fluid Fluid
Co-mheas measgachadh 5: 01
After Mixing
Work life(100g) Mins 50-60
Recommended operating time within 35mins (from mixing to finishing)
Temperature Range for application 15-35 ° C,Taiseachd 45%
Initial Bonding 5-6 hours at 25°C / 60mins at 65°C
Time to reach full cure 1-2 days under room temperature
/ 24 hours at 60°C keep 60mins
Shearing Strength 13MPa (60mins at 60°C or 3 days at 25°C)
VOC Test Accord with GB18538 /TB3139
Flame Retardant Rating S4 (DIN5510)