alle kategorier
EN

Aluminium Honeycomb Core Produktionslinje

Du er her : Forside>Produkt>Bryllupsudstyr>Aluminium Honeycomb Core Produktionslinje

  • https://www.beecorehoneycomb.com/upload/product/1593582712140644.jpg
  • https://www.beecorehoneycomb.com/upload/product/1593582716460086.jpg

Varmepresse-maskinkern (BHM HP A300T)


Produkt beskrivelse

Main features of the hot press machine

● Mainly used for hot press forming of aluminum honeycomb.

● This machine is mainly composed of fuselage, pressure plate, hydraulic system, heating system and electrical parts.

● The fuselage: Welded by profiles and steel plates to ensure that the fuselage has sufficient strength.

● Pressing plate: The pressing plate is a solid plate, and the oil passage in the plate is processed by deep hole drilling, which has good anti-leakage and pressure resistance performance.

● Hydraulic system: The hydraulic system consists of a fuel tank, an oil pump, a plurality of hydraulic valves and a cylinder.

● Heating system: The heating system consists of a heat transfer oil tank, an electric heating tube, a hot oil pump and a fuel pipe.

● Electrical parts: The electrical part consists of the main circuit and control circuit.


Funktionelt show


Specifikationer
Beskrivelse Enhed BHM-HP-A300T
Tryk T
300
Pressure motor power/Voltage KW/V 11 / 380
Heating motor power/Voltage KW/V 100 / 380
Antal arbejdslag
4-8
Hot plate spacing mm 200
Dimension of block heated (max) mm 2800 * 600 * 180
Dimension of working table mm 3000 * 720 * 40
varmesystem
Heat -transfer oil
Temperatur ° C Room tem- 250
Dimension mm 3200 * 1100 * 2800
Vægt kg
14000
Spænding V / Hz 380 / 50

UNDERSØGELSE